In the first half of 2019, the production of hot poly China Petroleum Resin C9 was about 119,300 tons, down 3.87% from the same period of last year. The main reasons are: 1. Environmental protection and safety supervision have led to an increase in the number of factory shutdowns. 2. Lanzhou Petrochemical ethylene cracking unit overhaul led to the shutdown of Lanzhou Huifeng Thermal China C9 Resinunit
In the past two months, the supply of hot poly China C9 Hydrocarbon Petroleum Resin has lost significantly. 3. Panjin Kaiheng and Fushun Yulong Chemical 2019 in the northeastern region started construction at the end of the first half of the year, which supplemented the supply of hot poly C9 petroleum resin.
In the first half of 2019, the production of cold-condensed C9 petroleum resin was about 21,200 tons, down 13.47% from the same period of last year. The main reasons are as follows: 1. The supply of resin materials in the raw material section is tight, and the construction of the cold-condensedHydrocarbon Petroleum Resin factoryis limited. 2. Considering the economic reasons, the cold copolymer resin integrated device mainly produces C5C9 Hydrocarbon Petroleum Resin factory. 3. There are long-term shutdowns in the Shandong area, and some units are shut down due to holidays and public activities, resulting in one
Fixed production loss.
In the first half of 2019, the output of Petroleum Resin C5C9 suppliers was about 37,100 tons, down 4.63% from the same period of last year. The main reason is that some units in Shandong and Central China have longer maintenance time, and the C5C9 copolymerized petroleum resin market has a significant loss. However, Shandong Kerong's C5C9 copolymerized petroleum resin equipment remained basically stable in the beginning of April, and a small amount of China PETROLEUM RESIN C5C9 copolymerized petroleum resin market supply was supplemented. Therefore, the production of C5C9 copolymerized petroleum resin in the first half of the year has not changed much compared with last year.