June and July each year is the rainy season in China. The middle and lower reaches of the Yangtze River and Taiwan continue to have a natural climate with rain and rain. During the rainy season, the air humidity is high, the temperature is high, and the clothes are prone to mildew.
At this time, the feed is prone to mildew during processing, storage, transportation and use. Once the feed is mildewed, it not only reduces the nutritional value of the feed, but also causes symptoms of diarrhea, wigs and even poisoning and death in animals, causing huge losses to the farmers. In order to avoid this happening, the experts gave us the following suggestions:
The mold is mainly grown at a temperature of 20-30 ° C, a humidity of 80-100%, a moisture content of more than 13%, and a pH between 1.5 and 8.5. To reduce the contamination of the mold, it is necessary to control the environmental conditions in which the feed is placed.
The warehouse for storing the feed requires a large space, good ventilation, cool and dry, and it is best to use a wooden frame to isolate the ground 10 cm high. The ground should be covered with waterproof material, the room temperature is controlled at about 15 °C, and the humidity is below 70%.
An anti-fungal agent can be added if necessary. There are two types of mold inhibitors, contact and gasification. Contactivity generally refers to organic acids and salts thereof, such as propionic acid and its salts, formic acid and its salts, citric acid, and the like. Among them, propionic acid and its salt are the most common, which not only can dehydrate the mold, but also prevent it from multiplying.
When the farmers are feeding, they should eat less and eat more. Always clean the trough to prevent mold contamination.
Ethanol Beta Amino Phosphoric acid produced by our company is the main raw material for feed addition.